Filter
Top Products
ENGLISH
109109
1
Connecting the extension cable while the set is in the Carrying Case
1
Mounting the External Camera Module on Rubber Mount
Using the External Camera Module : Wearing the External Camera
Module (SC-X105L/X110L only)
1. Insert the set into the Carrying Case while
its battery faces front side.
2. Open the cable cover strap on the bottom
side of the Carrying Case, and plug the
extension cable’s jack into the AV
Input/Output terminal of the set.
3. Fix the extension cable by covering the
cable cover strap (non-woven fabric).
1. Insert the velcro strap (velcro face down) into
the small slot located on the side of the rubber
mount.
2. Pull the lead end along the bottom through the
opposite slot.
3. Spread the rubber on top of the mount and
insert.
4. Run the Velcro Strap through its buckle.
5. Run the lead back under the Rubber mount
and fasten the velcro together.
6. When you press the [Power] button to start
recording, press on side of the Rubber
Mount.
1 2 3
1 2 3
4 5 6
Hook