Filter
Top Products
ENGLISH
Miscellaneous Information: Installing Programs
120120
Installing Windows98SE Driver (For Windows98SE only)
To use the CAM as a removable drive on Windows98SE, you may need to install the Windows98SE Driver.
1. Close all windows currently opened and insert the provided
software CD into the CD-ROM drive.
2. Place the CAM on the cradle and connect the USB cable to
the USB port of the cradle.
USB Mode screen appears.
3. Slide the [ ▲/▼ ] switch to select <USB 2.0 Mass Storage> or
<USB 1.1 Mass Storage> and press the [OK] button.
4. Installation process automatically begins.
2
Back
USB Mode
PC-Cam
PictBridge
USB 2.0 MassStorage
USB 1.1 MassStorage
Note
✤
During the Windows 98 SE driver installation, it may require to insert
Windows 98 operation system CD-ROM into the CD-ROM drive to proceed.