Filter
Top Products
ENGLISH
Miscellaneous Information: Connecting the CAM to other Devices
114114
You can copy your recorded files to a regular blank video tape. Connect the CAM to a VCR using the Audio/Video cable before
recording.
Notes
✤
Refer to operating instructions of your TV or VCR for detailed information on connecting external devices.
✤
You can stop and play video files using the same button as used for playing video files on the LCD monitor of the CAM. (Refer to page 40)
Copying Video files to a VCR Tape
1 2 3 45
6 7 89
10
ALARM INALARM OUTALARM RESETGNDTRIGGER OUT
TAPE END OUTSERIES OUTGNDSERIES IN1 SHOT REC IN
123456789
10
123456789
10
IN
OUT
OUT
IN
Line Input
Line Output
Line Input
1. Insert a blank video tape and select ‘Line Input’
on the VCR.
2. Slide [Mode Selector] down to turn on the CAM
and slide it down again.
◆ The Mode Selection screen appears.
3. Select <Play> in the Video mode to find the
desired video file with the [ ▲/▼ ] switch.
(Refer to page 40)
4. Slide the [ ▲/▼] switch to find the video file
you want to copy and press the [OK] button.
5. Press the [Record/Stop] button on the VCR to
start recording.