Filter
Top Products
Adjusting and Setting With Menus
About On-Screen Menus
27
Adjusting and Setting With Menus
About On-Screen Menus
You can change various settings, such as shooting
conditions and system setup of the camera, while
observing menus displayed on a connected monitor.
This section explains how to read the on-screen menus
before starting menu operations.
For the overall menu configurations, see page 70.
Note
You cannot perform pan/tilt and zoom operations while
the menu is displayed.
Main Menu
To display the main menu, press the DATA SCREEN
button on the supplied Remote Commander or the
MENU button on the RM-BR300 Remote Control Unit.
1 Cursor
Selects a setting menu.
Move the cursor up or down by pressing the V or v
button on the Remote Commander or by inclining
the joystick of the RM-BR300 Remote Control
Unit forward or backward.
2 Menu items
To display a setting menu, select one using the V or
v button on the Remote Commander or the joystick
of the RM-BR300 Remote Control Unit, and press
the HOME button on the Remote Commander or
the top button of the joystick on the RM-BR300.
3 Option borad indicator
Displays the name of the interface board inserted
into the card slot of the camera.
(The illustration above shows an example when the
HFBK-SD1 SD Interface Board is inserted.)
Setting Menus
The setting menu selected on the main menu is
displayed.
1 Setting menu
The name of the setting menu currently selected is
displayed here.
2 Cursor
Selects a setting item.
Move the cursor up or down by pressing the V or v
button on the Remote Commander or inclining the
joystick of the RM-BR300 Remote Control Unit
forward or backward.
3 Setting items
The setting items for this setting menu are
displayed.
To change a set value, select the setting item using
the V or v button on the Remote Commander or the
joystick of the RM-BR300 Remote Control Unit,
and press the B or b button on the Remote
Commander or incline the joystick on the RM-
BR300 right or left.
4 Set value
The currently set values are displayed.
To change a set value, use the B or b button on the
Remote Commander or the joystick of the RM-
BR300 Remote Control Unit.
For the default value of each setting item, see
“Menu Configuration” on page 70.
<MENU> DOWN CON
>EXPOSURE
COLOR
PICTURE
FOCUS
PAN TILT ZOOM
SYSTEM
STATUS
DOWN CON
<SYSTEM>
>IR-RECEIVE
IMG-FLIP
PAN REVERSE
TILT REVERSE
DISPLAY INFO
ANALOG OUT
SYNC TYPE
SYNC MASTER
ON
OFF
OFF
OFF
OFF
YP
B
P
R
SYNC
STD