Filter
Top Products
Adjusting and Setting With Menus
HD-SDI Menu
37
Note
This menu item does not appear when an HD signal of
50i format is output or when RGB is selected in D-SUB
OUT1. The SETUP setting is available when YPbPr is
selected in D-SUB OUT1. If your HFBK-SD1 Interface
Board is a former version, the SETUP item does not
appear even when YPbPr is selected. If you want to use
the SETUP setting, please purchase the latest version of
the HFBK-SD1, or contact your Sony dealer.
HD-SDI Menu
The HD-SDI menu is displayed only when the HFBK-
HD1 HD Interface Board is inserted into the card slot of
the camera.
ANALOG OUT
Select the component signal output from the MONITOR
connector (D-sub 15-pin) on the HFBK-HD1 HD
Interface Board.
YPbPr: Outputs analog component signals.
RGB: Outputs RGB signals.
SYNC VD
Select the signal output from the SYNC output on the
MONITOR connector
SYNC: Outputs the tri-level sync.
VD: Outputs the bi-level sync.
ADD SYNC
Appears when RGB is selected with ANALOG OUT
and specifies whether to add a sync signal.
RGB: Outputs each R, G and B signal with a sync signal
added.
OFF: Outputs each signal with no sync signal added.
<HD-SDI>
>ANALOG OUT
SYNC/VD
YPbPr
SYNC