Filter
Top Products
Installation and Connections
Connections
66
To connect multiple cameras to the SD
sync signal generator
You can connect up to seven cameras.
Note
Signal processing in the interface board causes all output
signals from the HFBK-SD1 to be delayed by
approximately 93H (horizontal sync time) compared
with the YPbPr/RGB output signals from the camera.
If you want to synchronize the phase between signals
output from the HFBK-SD1 and those from an SD sync
signal generator, set SYNC MASTER to SD1 in the
SYSTEM menu (page 35).
Second BRC-H700
75-ohm termination
switch: ON
to AC outlet
to AC outlet
75-ohm termination
switch: OFF
First BRC-H700
EXT SYNC IN
VIDEO
EXT SYNC IN
Third to Seventh (last)
BRC-H700
Commercially available
T-type signal separator
SD sync signal generator
to SYNC OUT
75-ohm coaxial cable
75-ohm termination
switch: OFF
EXT
SYNC IN
Video monitor, etc.
to AC outlet
to video input