Filter
Top Products
Installation and Connections
Connections
60
You can connect the camera to a computer equipped
with the VISCA RS-232C connector instead of the
connection to the RM-BR300 Remote Control Unit.
Note
When using the VISCA RS-232C connectors, check that
the BOTTOM switch on the bottom of the camera
(page 19) and the DIP switch on the bottom of the
Remote Control Unit (page 23) are set to RS-232C.
Connecting a Device Equipped with
VISCA RS-422 Connector
Connection via the VISCA RS-422 connectors enables
control of multiple cameras. This allows the connection
up to 1,200 m (3,937 feet) away.
Prepare the connecting cable using the RS-422
connector plugs that come with the camera and the
Remote Control Unit.
For making the cable, refer to the pin assignments of the
VISCA RS-422 connector (pages 80 and 81) and the
wiring diagram of VISCA RS-422 connection
(page 83).
For the use of the RS-422 connector plugs, see back
cover.
Notes
• When using the VISCA RS-422 connectors, check
that the BOTTOM switch on the bottom of the camera
(page 19) and the DIP switch on the bottom of the
Remote Control Unit (page 23) are set to RS-422.
• When the connections using the VISCA RS-422
connectors are made, the VISCA RS-232C connection
is not available.
• Do not make the VISCA RS-422 connection and the
VISCA RS-232C connection simultaneously. If both
cables are connected simultaneously, the camera may
malfunction.
RM-BR300 Remote Control Unit
to AC outlet
VISCA RS-422
VISCA RS-422
cable
First BRC-H700
to AC outlet
Second BRC-H700
to AC outlet
VISCA RS-422 cable
Third to Seventh
BRC-H700
to AC outlet
VISCA RS-422
VISCA RS-422
VISCA RS-422
VISCA RS-422
VISCA RS-422 cable
VISCA RS-422