Filter
Top Products
Operation Using the RM-BR300 Remote Control Unit
Storing the Camera Settings in Memory – Presetting Feature
48
Storing the Camera
Settings in Memory
– Presetting Feature
Up to sixteen combinations of settings (sixteen
positions), including camera position, zooming,
focusing, and backlighting, can be stored in the memory
of the camera using the RM-BR300 Remote Control
Unit.
For details of the camera settings to be preset, see
“Presetting Items” on page 74.
Storing Camera Settings
To select positions 9 to 16
While holding down the SHIFT button, press the
PRESET button (to store the settings) or the RESET
button (to cancel the settings). The lower indicator on
the SHIFT button will light and the POSITION 1 to 8
buttons can be used for positions 9 to 16.
When you release the SHIFT button, the upper indicator
lights and the POSITION 1 to 8 buttons can be used for
positions 1 to 8.
1
Press the PAN-TILT RESET button to reset the pan/
tilt position.
2
Press the CAMERA button to select the camera
whose settings you want to preset.
3
Adjust the position, zooming, focusing and
backlighting of the camera. (See page 44 to 47.)
4
While holding down the PRESET button (for
POSITION 1 to 8) or the SHIFT and PRESET
buttons (for POSITION 9 to 16), press any of the
POSITION buttons in which you want to store the
settings.
The settings are stored in the memory of the
camera.
The pressed button flashes during storing. Flashing
stops when storing is completed.
To recall the stored settings
Press any of the POSITION buttons in which you have
stored the settings.
For POSITION 9 to 16, hold down the SHIFT button
and press any of the POSITION buttons.
To cancel the preset memory
While holding down the RESET button (for POSITION
1 to 8) or the SHIFT and RESET buttons (for
POSITION 9 to 16), press the POSITION button from
which you want to cancel the settings.
The pressed button flashes during canceling of the
settings. Flashing stops when the settings have been
canceled.
Notes
• When the power is turned on, the camera starts with
the settings stored in POSITION 1.
• If you want to retain the previous pan and tilt positions
when the power is turned off and turned on again, store
those positions in POSITION 1.
• When you are storing or canceling the settings in one
POSITION, you cannot call up, store or cancel the
settings in another POSITION.
SHIFT
Lights for positions 1 to 8.
Lights for positions 9 to 16.
1
1
9
LOCK
MODE
VALU E
RESET
MENU
PRESET
SHIFT
L/R
DIRECTION
PAN EL
LIGHT
BLACK
LIGHT
PAN -T ILT
RESET
ONE PUSH
AWB
POWER
AUTO
MANUAL
AUTO
ONE PUSH
AF
234567
2
10
STD REV
3
11
4
POSITION
CAMERA
12
5
13
6
14
7
15
8
16
R
–+
BRIGHT
B
–+
FOCUS
NEAR FAR
24
41
RESET
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
RESET
PRESET
SHIFT
Press a POSITION button.
While holding down (for POSITION 9 to 16)
While holding down (for POSITION 1 to 8)
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
RESET
PRESET
SHIFT
Press a POSITION button.
While holding down (for POSITION 9 to 16)
While holding down (for POSITION 1 to 8)