Filter
Top Products
Chapter 1 Overview
Chapter 1 Overview 17
0 LENS connector (12-pin, for
2
/3-inch lens)
Connect the lens connector.
qa REMOTE connector (10-pin)
Connect the optional RM-M7G Remote Control Unit,
or the RCP-TX7 or RCP-D50/D51 Remote Control
Panel to this connector. Set the CAMERA HEAD
SELECT switch on the bottom of RM-M7G
to 1.
Note
When using a remote control unit or a remote control
panel, note the following points.
• When operating the camera head from the camera
control unit, connect the remote control unit or
remote control panel to the camera control unit.
• EZ mode cannot be used if a remote control unit or a
remote control panel is connected to the camera head.
• Before attaching/detaching the remote control unit or
remote control panel to/from the camera head, be sure
to turn off the camera. Otherwise, the camera may not
function properly.
qs VTR and camera adaptor connectors (PRO 76-
pin DIGITAL and PRO 50-pin)
Connect a dockable VTR or a camera adaptor. A PRO
76-pin DIGITAL connector is for the DSR-1/1P and
the CA-D50/D50P and CA-TX7/TX7P camera
adaptor, and a PRO 50-pin connector is for the PVV-3/
3P.