Filter
Top Products
56 Chapter 4 Viewfinder Screen Indications and Menus
Chapter 4 Viewfinder Screen Indications and Menus
is displayed, then press the MENU dial.
The question mark changes to an arrow, and the
selected menu page is displayed.
Setting the Menus
Display the menu page on which you wish to make
settings, then proceed in the following manner:
1 Turn the MENU dial to move the arrow to your
desired item, then press the MENU dial.
The arrow changes to a question mark.
2 Turn the MENU dial to select your desired setting
item or value, then press the MENU dial.
The question mark changes to an arrow, and your
setting is registered.
Repeat Steps 1 and 2.
When you finish making settings
Press the MENU switch toward the OFF/STATUS side
to exit the menu.
To cancel changing a setting
While the question mark is displayed in Step 2, press
the MENU switch toward the ON/CANCEL side. The
original setting will be restored.
To return a setting item to the default value
Turn the MENU dial to move the cursor to the item
whose value you wish to return to its default, then hold
the MENU dial pressed for three seconds.
Using the USER Menu
You can select desired pages from among the
OPERATION, PAINT, MAINTENANCE and FILE
menu pages and copy and set them on the USER
menu. If you register pages frequently used on the
USER menu, you can easily call those pages and use
them. In addition, USER PAGE 1 through USER
PAGE 5, on which you can copy and register
individual items from the menus, are provided on the
USER menu. You can place up to ten desired menu
items on each of these pages.
Registering a desired menu page on the
USER menu
1 Display the TOP MENU.
For details, see “ Displaying the TOP MENU” on
page 55.
2 Turn the MENU dial to select USER MENU
CUSTOMIZE, then press the MENU dial.
3 Display page U1 <PAGE EDIT>.
For details, see “Displaying your desired menu page”
on page 55.
<PAGE EDIT> U1 TOP
WHITE:OK
PAGE: 1/1
1:<USER PAGE 1>
2:<USER PAGE 2>
3:<USER PAGE 3>
4:<USER PAGE 4>
5:<USER PAGE 5>
6:-----
7:-----
8:-----
9:-----
4 Turn the MENU dial to select the number for
which the menu page is to be registered, then press
the MENU dial.
The operation select screen appears.
SELECT
MOVE
DELETE
RET
Menu Operation