Filter
Top Products
Chapter 1 Overview
20 Chapter 1 Overview
SHUTTER GAIN UP
TAKE BATTREC
TALLY
HIGH LOW OFF
LIGHT
You can switch the scan size of the DXF-801/801CE
in accordance with the aspect ratio selected on the
camera or camcorder.
1 Eyepiece focusing knob
Turn this to adjust the viewfinder focus to match your
eyesight. (See page 81.)
2 Stopper
Lift up when detaching the viewfinder (See page 31).
3 LIGHT switch and light
The light lights the lens and the switch controls the
light as follows.
HIGH/LOW: Turn the light on and control the
brightness.
OFF: Turns the lights off.
DXF-801/801CE Viewfinder
4 TAKE/TALLY indicator (orange)
This indicator functions as a green tally lamp when the
CCU is connected with this camera.
5 BATT (battery) indicator (red)
This lights when the battery capacity is low.
1 Eyepiece focusing knob
2 Stopper
3 LIGHT switch and light
4 TAKE/TALLY indicator
5 BATT indicator
6 REC/TALLY indicators
7 GAIN UP indicator
8 SHUTTER indicator
9 PEAKING control
0 CONTRAST control
qa Tally lamp
qs BRIGHT control
qd Eyepiece release catch
qf TALLY switch
qg DISPLAY switch
qh Viewfinder connector
Microphone holding screw
Microphone holder
Microphone
Eye cup
Location and Function of Parts