Filter
Top Products
58 Chapter 4 Viewfinder Screen Indications and Menus
Chapter 4 Viewfinder Screen Indications and Menus
Registering a desired item on a USER
PAGE
To register a desired item on a USER PAGE, follow
the procedure below.
1 Display the TOP MENU.
For details, see “Displaying the TOP MENU” on page
55.
2 Turn the MENU dial to select USER MENU
CUSTOMIZE, then press the MENU dial.
3 Turn the MENU dial to move the arrow to the page
number at the top of the screen, then press the
MENU dial.
The arrow changes to a question mark.
4 Turn the MENU dial to select any of U2 through
U11, then press the MENU dial.
The USER PAGE setting screen appears.
U2: USER PAGE 1 setting screen <USER P1
EDIT>
U3: USER PAGE 2 setting screen <USER P2
EDIT>
.
.
U11: USER PAGE 10 setting screen <USER P10
EDIT>
<USER P1 EDIT> U2 TOP
A.IRIS OVERRIDE
DTL LEVEL
MASTER BLACK
PRESET MATRIX
SCREEN MODE
5 Turn the MENU dial to select the line for which
the menu item is to be registered, then press the
MENU dial.
The operation select screen appears.
If you select a line for which no item has been
registered, the ITEM SELECT screen shown in
Step 6 is displayed.
6 Turn the MENU dial to select SELECT, then press
the MENU dial.
The ITEM SELECT screen appears.
<ITEM SELECT> 1 RET
1 :GAIN[L]
2 :GAIN[M]
3 :GAIN[H]
4 :OUTPUT[DCC]
5 :5600K DIMMER
6 :OPERATION RESET
7 :A.IRIS OVERRIDE
8 :WHT C. TEMP
9 :WHT C. TEMP FINE
10:WHT C. TEMP R GAIN
7 Select an item to be registered, following the
procedure below.
To select from among items 1 - 10
Turn the MENU dial to select an item to be
registered, then press the MENU dial. The screen
returns to the USER P1 EDIT screen, and the
selected item is displayed.
<USER P1 EDIT> U2 TOP
GAIN[L]
DTL LEVEL
MASTER BLACK
PRESET MATRIX
SCREEN MODE
To select items 11 or after
1) Turn the MENU dial to move the arrow to the
figure at the top of the screen, then press the
MENU dial.
The arrow changes to a question mark.
2) Turn the MENU dial until the desired item
appears, then press the MENU dial.
The question mark changes to an arrow.
3) Turn the MENU dial to select the item to be
registered, then press the MENU dial.
The screen returns to the USER P1 EDIT
screen, and the selected item is displayed.
Repeat Steps 5, 6 and 7 as required.
Menu Operation