Filter
Top Products
Chapter 4 Viewfinder Screen Indications and Menus 63
Chapter 4 Viewfinder Screen Indications and Menus
Structure and setting values of the PAINT menu
Submenu title Page Setting item: Selectable Remarks
Initial value values
<SHUTTER> P1 SHUTTER: 1/100
a)
— To adjust the shutter speed
CLS FREQUENCY: 60.38 Hz
b)
To adjust the CLS frequency
50.31 (PAL)
60.38 (NTSC)
EVS: OFF ON, OFF To set EVS (The vertical resolution is chaged
from 400 lines to 450 lines.)
Note
When EVS is turned ON, the vertical resolution
can be increased, but aliasing may be
generated when shooting a moving subject.
PAINT MENU RESET — To reset the PAINT menu settings
<BLACK/FLARE> P2 MASTER BLACK: 0 –99 to 0 to 99 To adjust the master black level
FLARE LEVEL: –99 to 0 to 99 To adjust the flare level
[R] 0 [G] 0 [B] 0
ON ON, OFF To turn the flare on/off
<DETAIL> P3 LEVEL: 0 –99 to 0 to 99 To adjust the detail (contour correction) level
H/V RATIO: 0 –99 to 0 to 99 To adjust the ratio of vertical detail to horizontal
detail in detail correction (contour correction)
LEVEL DEPEND: 0 –99 to 0 to 99 To decrease the black level in the detail
correction (contour correction)
FREQUENCY: 0 –99 to 0 to 99 To adjust thickness of contour lines for the detail
correction (contour correction)
CRISP: 0 –99 to 0 to 99 To adjust the level at which noise signals are to
be removed in the detail correction (contour
correction)
<GAMMA/BLACK P4 GAMMA LEVEL: –99 to 0 to 99 To adjust the gamma curve
GAMMA> [R] 0 [B] 0 [M] 0
BLACK GAMMA LEVEL: –99 to 0 to 99 To adjust the gamma curve near the black
[R] 0 [B] 0 [M] 0
PAINT Menu
The PAINT menu consists of 10 pages. To display the
PAINT menu, first display the TOP MENU, turn the
MENU dial to select PAINT, then press the MENU
dial.
For details on how to display the TOP MENU, see
“Displaying the TOP MENU” on page 55.
<SHUTTER> P1 TOP
SHUTTER : 1/100
CLS FREQUENCY: 60.38H
Z
EVS : OFF
PAINT MENU RESET
a) NTSC: 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000, CLS
PAL: 1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000, CLS
b) When the camera is used alone
NTSC: 60.38 Hz to 6000 Hz
PAL: 50.00 Hz to 6000 Hz
When the camera is used with the RCP-TX7
NTSC: 60.38 Hz to 200.3 Hz (The display on the panel
of the RCP-TX7 is 60.4.)
PAL: 50.31 Hz to 201.4 Hz
When the camera is used with the RCP-D50/D51
NTSC: 60.38 Hz to 6000 Hz
PAL: 50.31 Hz to 6000 Hz