Filter
Top Products
60 Chapter 4 Viewfinder Screen Indications and Menus
Chapter 4 Viewfinder Screen Indications and Menus
Menu Operation
OPERATION Menu
The OPERATION menu consists of 11 pages. To
display the OPERATION menu, first display the TOP
MENU, turn the MENU dial to select OPERATION,
then press the MENU dial.
For details on how to display the TOP MENU, see
“Displaying the TOP MENU” on page 55.
Structure and setting values of the OPERATION menu
Submenu title Page Setting item: Selectable Remarks
Initial value values
<SWITCH> 1 GAIN [L]: 0 dB –3, 0, 3, 6, 9, 12, To set the GAIN L value
18, 24, 30, 36
GAIN [M]: 9 dB –3, 0, 3, 6, 9, 12, To set the GAIN M value
18, 24, 30, 36
GAIN [H]: 18 dB –3, 0, 3, 6, 9, 12, To set the GAIN H value
18, 24, 30, 36
OUTPUT [DCC]: AUTO KNEE, To set DCC operation mode
AUTO KNEE ADAPTIVE
5600K DIMMER: 5 0 to 5 to 9 To adjust the brightness for the LED of the 5600K
button when it is lit to indicate the button’s
activation
OPERATION MENU — To reset the OPERATION menu settings to
RESET factory-preset values
<AUTO IRIS> 2
AUTO IRIS
–99 to 0 to 99 To adjust the reference value for auto aperture
OVERRIDE
: 0
<PRESET WHITE> 3 COLOR TEMP: 1520K to 3200K To adjust the preset color temperature value
3200K to 65535K (when the W.BAL switch is set to PRE) for
white balance
FINE: 0 –99 to 0 to 99 To fine-tune the preset color temperature value
for white balance
R GAIN: 0 –99 to 0 to 99 To adjust the R (red) gain of the preset color
temperature value for white balance
B GAIN: 0 –99 to 0 to 99 To adjust the B (blue) gain of the preset color
temperature value for white balance
<WHITE MEMORY> 4 AWB MEMORY 2, 2×4FL To select if the two A and B white balance values
MODE: 2 are to apply to all four settings of the FILTER
control or not
2: Not apply to the FILTER control
2×4FL: Apply to the FILTER control
WIDE BAND AWB: ON, OFF To select if the 5600K button is to be automatically
ON activated when the color temperature changes
greatly
SHOCKLESS WHITE: OFF, 1, 2, 3, 4, 5 To adjust the transient time of switching white
3 balance (this setting does not apply to on/off of the
5600K button)
<SWITCH> 1 TOP
GAIN [L] : 0dB
[M] : 9dB
[H] : 18dB
OUTPUT [DCC] : AUTO KNEE
5600K DIMMER : 5
OPERATION MENU RESET