Filter
Top Products
117
“Memory Stick
” Operations
1
3
2
FN
7
PHOTO
MEMORY/
NET-
WORK
CAMERA
(CHG)
POWER
OFF
ON
MODE
VCR
MEMORY SET
STILL SET
BURST
QUALITY
IMAGE SIZE
EXIT
RET.
EXEC
OFF
Recording still images on a “Memory Stick”
– Memory photo recording
(1) Set the POWER switch to MEMORY/NETWORK (DCR-IP55 only).
(2) Press FN to display PAGE1.
(3) Press MENU, then select STILL SET in in the menu settings, then press EXEC
(p. 178).
(4) Press r/R to select BURST, then press EXEC.
(5) Press r/R to select the desired settings.
(6) Press EXIT to make the menu settings disappear.
(7) Press PHOTO deeper.
If the “Memory Stick” becomes full
FULL appears on the LCD screen, and you cannot record still images on this
“Memory Stick.”
The number of still images in continuous shooting
The number of still images you can shoot continuously varies depending on the image
size and the capacity of the “Memory Stick.”
During recording images continuously
The flash does not work.
When shooting with the self-timer function or the Remote Commander
Your camcorder automatically records up to the maximum recordable number of still
images.
If the remaining capacity of the ”Memory Stick“ is less than for three images.
EXP BRKTG does not work. When you press PHOTO lightly, FULL appears on the
screen.
When selecting NORMAL
Recording continues up to the maximum number of still images during pressing
PHOTO deeper. Release PHOTO to stop recording.
The effect of EXP BRKTG
The effect of EXP BRKTG may not be noticable on the LCD screen.
We recommend viewing images on TV or the computer to realise the effect.