Filter
Top Products
191
Troubleshooting
Warning indicators and messages
100-0001 Warning indicator as to file
Slow flashing:
•The file is corrupted.
•The file is unreadable.
•You are trying to carry out MEMORY MIX
function on moving picture (p. 125).
C:21:00 Self-diagnosis display (p. 190).
E The battery is dead or nearly dead
Slow flashing:
•The battery is nearly dead.
Depending on operational, enviromental or
battery conditions the E indicator may flash,
even if there are approximately five to 10
minutes remaining.
% Moisture condensation has occurred*
Fast flashing:
•Eject the cassette, turn off your camcorder,
and leave it for about one hour with the
cassette compartment open (p. 201).
Warning indicator as to Micro Cassette
Memory*
Slow flashing:
•Eject the cassette, and insert it again. If even
then the indicator flashes, the Micro Cassette
Memory of the cassette may be faulty.
Fast flashing:
•The Micro Cassette Memory of the
camcorder may be faulty.
Warning indicator as to “Memory Stick”
Slow flashing:
•No “Memory Stick” is inserted.
Fast flashing*:
•The “Memory Stick” is not readable with
your camcorder (p. 103).
•The image cannot be recorded on “Memory
Stick”.
Warning indicator as to “Memory Stick”
formatting*
Fast flashing:
•The “Memory Stick” data is corrupted.
•“Memory Stick” is not formatted correctly
(p. 179).
If indicators and messages appear on the LCD screen, check the following:
See the page in parentheses “()” for more information.
Warning indicators
C:21:00
Q Warning indicator as to tape
Slow flashing:
•The remaining tape is less than five minutes.
•No cassette is inserted.*
•The write-protect tab on the cassette is out
(red) (p. 26).*
Fast flashing:
•The tape has run out.*
qZ Warning indicator as to a cleaning
cassette
Slow flashing:
•The cleaning cassette is inserted in the
camcorder in NETWORK (DCR-IP55 only)
mode (p. 202).
Z You need to eject the cassette*
Slow flashing:
•The write-protect tab on the cassette is out
(red) (p. 26).
Fast flashing:
•Moisture condensation has occurred (p. 201).
•The tape has run out.
•The self-diagnosis display function is
activated (p. 190).
- The image is protected*
Slow flashing:
•The image is protected (p. 146).
Warning indicator as to the flash
Slow flashing:
•During charging.
Fast flashing:
•The self-diagnosis display function is
activated (p. 190).
•There is something wrong with the flash.
Warning indicator as to recording of
still image
Slow flashing:
•The still image cannot be recorded on a
“Memory Stick” (p. 49).
* You hear the melody or beep sound.