Filter
Top Products
119
“Memory Stick
” Operations
Recording still images on a “Memory Stick”
– Memory photo recording
If you leave your camcorder for five or more minutes after disconnecting the
power source
Your camcorder returns to the default setting (auto).
The flash does not fire even if you select AUTO and Auto red-eye reduction ( )
during the following operations:
–NightShot
–Exposure
–Spotlight of PROGRAM AE
–Sunset & moon of PROGRAM AE
–Landscape of PROGRAM AE
–Flexible Spot Meter
During recording images continuously
The flash does not fire.
Shooting with an auxiliary light – HOLOGRAM AF
The HOLOGRAM AF is an auxiliary light source used for focusing on subjects in dark
places.
Set HOLOGRAM F to AUTO in in the menu settings. (The default setting is
AUTO.)
When appears on the LCD screen in a dark place, press PHOTO lightly. Then the
auxiliary light will automatically emit until the subject is focused.
About HOLOGRAM AF
“HOLOGRAM AF (Auto-Focus),” an application of laser holograms, is a new AF
optical system that enables still image shooting in dark places. Having gentler radiation
than conventional high-brightness LEDs or lamps, the system satisfies Laser Class 1 (*)
specification and thus maintains higher safety for human eyes.
No safety problems will be caused by directly looking into the HOLOGRAM AF emitter
at a close range. However, it is not recommended to do so, because you may experience
such effects like several minutes of image residual and dazzling, that you encounter
after looking into a flashlight.
* HOLOGRAM AF satisfies Class 1(time base 30 000 seconds), specified in all of JIS
(Japan), IEC(EU), and FDA(US) industry standards.
Complying with these standards identifies the laser product to be safe, under a
condition that a human looks at the laser light either directly or even through a lens
for 30 000 seconds.
HOLOGRAM AF emitter