Filter
Top Products
122
Recording an image from a tape as a still
image
Your camcorder can read moving picture data recorded on a tape and record it as a still
image on a “Memory Stick.”
Your camcorder can also take in moving picture data from other equipment through the
input connector and record it as a still image on a “Memory Stick.”
Before operation
•Insert a recorded tape into your camcorder.
•Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press . The picture recorded on the tape is played back.
(3) Keep pressing PHOTO lightly until the picture from the tape freezes. CAPTURE
appears on the LCD screen. Recording does not start yet.
(4) Press PHOTO deeper. The image displayed on the LCD screen will be recorded on
a “Memory Stick.” Recording is complete when the bar scroll indicator disappears.
Image size of still images
Image size is automatically set to 640 x 480.
When the ”Memory Stick“ access lamp is lit or flashing
Do not shake or strike the unit. As well do not turn the power off, eject a “Memory
Stick” or remove the battery pack. Otherwise, the image data breakdown may occur.
If MEMORY STICK FORMAT ERROR appears on the LCD screen
The inserted “Memory Stick” is incompatible with your camcorder because its format
does not comform with your camcorder. Check the format of the “Memory Stick.”
If you press PHOTO lightly in the playback mode
Your camcorder stops momentarily.
Sound recorded on a tape
You cannot record audio from a tape.
1
2
34
1 / 40
CAPTURE
SFN
640
SFN
640
FN FN
PHOTO
PHOTO
MEMORY/
NET-
WORK
CAMERA
(CHG)
POWER
OFF
ON
MODE
VCR