Filter
Top Products
17
Getting started
Installing the battery pack
(1) Lift BATT (battery) RELEASE in the direction of the arrow to release the battery
terminal cover.
(2) Insert the battery pack in the direction of the arrow until it clicks.
Step 1 Preparing the power supply
1 2
To remove the battery pack
The battery pack is removed in the same way as the battery terminal cover.
Battery terminal cover
To protect the battery terminals, install the battery terminal cover after the battery pack
is removed.
Installing the battery pack
Make sure that the battery pack is properly installed. Check also the battery pack is not
attached to your camcorder askew.