Filter
Top Products
3-4 (E)
HDC-900/950 IMM
3-2. TOP Menu
3-2. TOP Menu
The TOP menu is provided for indicating the whole configuration of the menu items.
Displaying the TOP menu
HDC-900/910 : Set the DISPLAY switch from “OFF” to “MENU” while pressing the MENU SELECT
switch toward the “ENTER” side.
HDC-950/930 : Set the DISPLAY switch from “OFF” to “MENU” while pressing the rotary encoder.
[Reference][Reference]
[Reference][Reference]
[Reference]
To select the menu to be displayed on the viewfinder, switch setting on the AT-130 board is required.
For details, refer to “Selecting the Menu” in Section 3-1.
TOP MENU
Menu Description
USER
a)
You can select desired pages and items from the OPERATION,
PAINT, MAINTENANCE, FILE and DIAGNOSIS menu pages and set
them on the USER MENU CUSTOMIZE menu.
For details, refer to the operation manual supplied with this unit.
USER MENU CUSTOMIZE
a)
This menu is used for editting menu pages and items to be set on the
USER menu.
For details, refer to the operation manual supplied with this unit.
OPERATION This menu consists of VF screen display items to be set by a camera
operation.
For details, refer to the operation manual supplied with this unit.
PAINT This menu consists of general paint operation items such as white.
For details, refer to the operation manual supplied with this unit.
MAINTENANCE This menu consists of paint items used less frequently such as
shading adjustment and items required for the maintenance of the
camera such as system change.
FILE This menu is used for performing file operations such as saving the
reference file.
DIAGNOSIS This menu describes the self-diagnosis and VTR status, etc.
a) These menus are displayed only when the ROM version on the AT board of the unit is Ver 1.30 or higher.
<TOP MENU>
USER
USER MENU CUSTOMIZE
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS