Filter
Top Products
3-12 (E)
HDC-900/950 IMM
(Display is initial values.)
<KNEE>
[R] [G] [B] [M]
POINT : 0 0 0 0
SLOPE : 0 0 0 0
WHT CLP: 0 0 0 0
KNEE SAT LEVEL 0
KNEE : ON
KNEE SAT: OFF
WHT CLIP: ON
TEST : OFF
<KNEE>
[R] [G] [B] [M]
POINT : 0 0 0 0
SLOPE : 0 0 0 0
WHT CLP: 0 0 0 0
KNEE : ON WHT CLIP : ON
AUTO KNEE : OFF
KNEE SAT : 0
: OFF
TEST : OFF
ROM Version lower than 1.30 ROM Version 1.30 or higher
KNEE page
Item Setting Description
POINT _99 to 99 Sets the knee point level when the settings of the auto knee function
R/G/B/M of the R, G, B and master are OFF.
SLOPE _99 to 99 Sets the knee slope level when the settings of the auto knee function
R/G/B/M of the R, G, B and master are OFF.
WHT CLP _99 to 99 Sets the white clip level of the R, G, B and master.
R/G/B/M
KNEE SAT LEVEL
a)
_99 to 99 Sets the knee saturation level.
KNEE ON, OFF Sets the knee correction circuit to ON or OFF.
KNEE SAT
a)
ON, OFF Sets the knee saturation function to ON or OFF.
WHT CLIP ON, OFF Sets the white clip function to ON or OFF.
AUTO KNEE
b)
ON, OFF Sets the auto knee function to ON or OFF.
KNEE SAT
b)
_99 to 99 Sets the knee saturation level.
ON, OFF Sets the knee saturation function to ON or OFF.
TEST OFF, 1, 2 Selects the test signal.
OFF : Provides no test signals.
1 : Provides the test signal of the sawtooth waveform.
2 :
Provides the test signal of the sawtooth waveform of digital output.
a) These items are displayed only when the ROM version on the AT board of the unit is lower than Ver 1.30.
b) These items are displayed only when the ROM version on the AT board of the unit is Ver 1.30 or higher.
3-4. PAINT Menu