Filter
Top Products
3-5 (E)
HDC-900/950 IMM
3-3. OPERATION Menu
The OPERATION menu consists of the items that a
camera operator can set when using this camera, such as
VF screen display setting.
For details, refer to the operation manual supplied with this
unit.
VF DISPLAY page
Item Setting Initial values
EX 3S, ON, OFF ON
ZOOM 3S, ON, OFF OFF
FOCUS 3S, ON, OFF OFF
ND 3S, ON, OFF ON
CC 3S, ON, OFF ON
IRIS 3S, ON, OFF ON
WHITE 3S, ON, OFF OFF
D5600K 3S, ON, OFF ON
GAIN 3S, ON, OFF ON
SHUTT 3S, ON, OFF ON
BATT 3S, ON, OFF OFF
RETURN 3S, ON, OFF ON
TALK
a)
3S, ON, OFF ON
MESSAG ALL, AT, WRN, OFF ALL
a) This item is displayed only when the ROM version on the AT board of
the unit is Ver 1.30 or higher.
'!' IND page
Item Setting Initial values
[IND] [NORMAL] [IND] [NORMAL]
ND ON, OFF 1, 2, 3, 4, 5 ON 1
CC ON, OFF A, B, C, D, E ON B
WHITE ON, OFF P, A, B ON A, B
D5600K ON, OFF ON, OFF ON OFF
GAIN ON, OFF L, M, H ON L
SHUTT ON, OFF ON, OFF ON OFF
FAN ON, OFF AUTO1, ON AUTO1
AUTO2,
MIN, MAX
EXT ON, OFF ON, OFF ON OFF
FORMAT ON, OFF 23.98PsF
a)
ON 59.94I
60I/59.94I, 50I,
30PsF/29.97PsF
a)
,
25PsF
a)
,
24PsF/23.98PsF
a)
a) HDC-900/950 only.
3-3. OPERATION Menu
MARKER page
Item Setting Initial values
MARKER ON, OFF ON
CENTER
a)
ON, OFF ON
1, 2, 3, 4 1
SAFETY ZONE
a)
ON, OFF ON
80.0, 90.0, 92.5, 95.0 90.0
EFECT ON, OFF OFF
ASPECT MODE
b)
16:9, 15:9, 15:9, 13:9 4:3
4:3, VAR H, VAR V,
1035, VISTA1, VISTA2
MASK
a)
ON, OFF OFF
0 to 100 50
VAR WIDTH
b)
0 to 1920 (VAR H) _
0 to 1080 (VAR V) _
SAFETY
a) b)
ON, OFF ON
80.0, 90.0, 92.5, 95.0 90.0
a) Setting ON/OFF of this item is disabled in HDC-900/910. (“[ON], [OFF]”
is displayed.) To set this item to ON or OFF, use the switch located on
the rear side of HDC-900/910. In addition, when connecting CA-905L to
HDC-950/930, setting ON/OFF of this item is also disabled. (“[ON],
[OFF]” is displayed as well.) To set this item ON or OFF, use the switch
located on the rear side of CA-905L.
b) Setting of this item is disabled when setting VF SCAN switch of HDC-
900/910 to 4:3 or when connecting CA-905L to HDC-950/930 and setting
VF SCAN switch of CA905L to 4:3. (“—” is displayed as well.)
GAIN SW page
Item Setting Initial values
LOW _3, 0, 3, 6, 12 0
MIDDLE _3, 0, 3, 6, 12 6
HIGH _3, 0, 3, 6, 12 12
ZEBRA/VF DTL page
Item Setting Initial values
ZEBRA ON, OFF ON
1, 2, 1 & 2 1
ZEBRA1 58 to 82 % 70 %
ZEBRA2 88 to 112 % 100 %
VF SKIN GATE
a)
ON, OFF OFF
VF DTL
b)
_99 to 99 0
ON, OFF ON
a) This item is displayed only when the ROM version on the AT board of
the unit is Ver 1.30 or higher.
b) Setting ON/OFF of this item is disabled in HDC-900/910. (“[ON], [OFF]”
is displayed.) To set this item to ON or OFF, use the switch located on
the rear side of HDC-900/910. In addition, when connecting CA-905L to
HDC-950/930, setting ON/OFF of this item is also disabled. (“[ON],
[OFF]” is displayed as well.) To set this item ON or OFF, use the switch
located on the rear side of CA-905L.