Filter
Top Products
Fader Function
69
Recording
For fading in a scene
Press the ASSIGN button to which you assigned
the Fader function in STBY (recording standby)
status.
The fade-in function is turned on.
For fading out
Press the ASSIGN button to which you assigned
the Fader function during recording.
The camcorder enters in the fade-out standby
status.
When the preparatory settings are completed, you
can start recording.
Press the REC START/STOP button.
Recording begins by fading in the camera picture.
When the fade-in process you specified is
completed, the camcorder enters Normal
Recording mode.
The Fade-In Type indication flashes during the
fade-in process and goes off when the process
ends.
• If you set “Fade Out” to “On” with the menu,
the camcorder automatically enters Fade-out
standby status when it is set to Recording mode.
• When you press the ASSIGN button to which
you assigned the Fader function after starting
recording, the camcorder enters fade-out
standby status.
Press the REC START/STOP button to
start fading out of the camera picture.
The fading-out process begins.
When the fading-out process you specified is
completed, recording simultaneously stops.
The Fade-Out Type indication flashes during the
fade-out process and goes off when the process
ends.
Canceling the Fader function
Set “Fade In” and “Fade Out” to “Off” with the
menu.
Or press the ASSIGN button again.
Note
The Fade In/Fade Out settings automatically
return to “Off” when you turn off the camcorder,
while the Type and Time settings set with the
menu are maintained.
Starting Recording with a Fade In
Ending Recording with a Fade Out