Filter
Top Products
Operating the Camera
Configuration of Main Viewer
19
Volume
(Displayed when Microphone (page 37) is set to On.)
Adjust the microphone volume by moving the each
slider bar.
When you click , the icon changes to and the
microphone input stops. To input the microphone, click
again.
When you click , the icon changes to and the
microphone output stops. To output the microphone,
click again.
Camera control panel
On this panel, you can control the pan/tilt/home position
of the camera, adjust the zoom and switch focus mode
(page 21). In addition, you can obtain authority to
operate the camera when the exclusive control mode is
on.
Image action
Select Area zoom or Vector dragging.
Pan/Tilt control
Click the arrow button the direction in which you want
to move the camera. Keep it pressed to move the camera
continuously.
To return to the home position, click .
Zoom control
Press to zoom out, and press to zoom in.
Zooming continues while the button remains pressed.
Note
The four edges of the image may be dark depending on
the zoom position. This is a phenomenon related to the
structure of the camera, and does not cause a problem.
Focus control
To focus on a nearby object, press . To focus on a
distant object, press .
By pressing , focus is set to the optimum
position.
Note
To control the focus manually, set Focus mode of the
Camera menu to Manual (page 37).
(Exclusive control)
Click this button to display the time remaining for
operation authority. However, if operation authority has
not been obtained, the waiting time is displayed.
Panorama panel
You can switch the display between a panorama image
and doughnut panorama image.
Trigger panel
The above is displayed only when Viewer mode
(page 62) is set to Full, and one or more triggers are
enabled in the Trigger menu (page 79).
The configured functions are displayed as buttons on
this panel.
Click the function button you want to use on the Trigger
panel. The selected function is activated. The selectable
functions are as follows:
• send still image files attached to an e-mail (page 24)
• send still image files to an FTP server (page 24)
• record still image files in the built-in memory or CF
memory card (not supplied) (page 24)
• control the alarm output (page 24)
• switch the Day/Night function on/off (page 24)
• play the audio file stored in the camera (page 24)