Filter
Top Products
Administrating the Camera
Configuring the System — System Menu
34
Superimpose Tab
Select whether to superimpose the camera ID and/or
date & time on the image or not.
The camera ID is also superimposed on images recorded
by the Pre-alarm or Post-alarm function.
Superimpose
On/Off
When using the Superimpose function, select On.
Font size
Set the font size.
Style
Set the items to superimpose and the format to display
in. Superimpose settings are available for the following
items:
• Date: Set the display setting for date.
• Camera ID: Configure the Camera ID display
setting.
• Camera Direction: Configure the Camera Direction
display setting.
• Event: Configure the display setting for when an
event occurs.
• Zoom: Configure the Zoom factor display setting.
• Codec: Configure the bit rate and frame rate display
settings.
• Custom String: Set Custom String to display the
text of your choice.
Display format, including color, can be individually set
for each item.
Color: Select the font color of the superimposed text.
Brink: Select On to enable brinking for the
superimposed text.
String Effect: Enable a string effect for displayed text.
Advanced: Detailed settings, such as formatting the
display of date and time, are also available.
Superimpose format
Set the display position of superimposed text.
You can set the content to superimpose on the bottom
left, bottom right, top left, top right, center, top middle,
and bottom middle parts, respectively.
Camera Direction
Set the Camera Direction. Select either of Azimuth or
Area title.
Preset position
Checking here will display the preset name when the
camera faces the direction registered as preset.
Azimuth
Configure Azimuth.
Mode: Select between 4-azimuth or 8-azimuth displays.