Filter
Top Products
Administrating the Camera
Setting the Camera Image and Audio — Camera Menu
38
Picture Tab
You can set the color condition, exposure, etc., of the
camera.
Display sample:
White balance
Select the white balance mode.
Auto: Automatically adjusts the color to be closest to
the image you are viewing (approximately 3000 K to
7500 K).
Indoor: Adjusts the white balance for shooting indoors
under incandescent lighting (about 3200 K).
Outdoor: Adjusts the white balance for shooting
outdoors (about 5800 K).
One push WB: The One push trigger button becomes
active. Click the button to adjust the white balance
instantly.
ATW (SNC-RS46N/P, SNC-RS44N/P, SNC-RS86N/
P, SNC-RS84N/P only): Eliminating the influences
causing from the environmental illumination or
lights, adjust the white balance automatically to
reproduce the original color of the objects.
(approximately 2000 K to 10000 K).
Manual: When this option is selected, R gain and B
gain become active. Selectable gain values are from
0 to 255.
Visibility Enhancer
Using the Visibility Enhancer function makes the darker
part of the camera image brighter as well as auto-adjust
brightness and contrast to show bright parts clearly
without white out.
To use this function, select High, Middle or Low. If you
do not use this function, select Off.
XDNR
Image noise can be reduced by using the XDNR
function. The intensity of the Noise Reduction filter can
be selected among High, Middle and Low. If you do not
use this function, select Off.
Exposure mode
Select the exposure mode of the camera.
The setting items required for the selected mode become
active.
Full auto: The camera performs the gain and iris
adjustment automatically. In this case, the shutter
speed is fixed. (1/60 sec. for NTSC or 1/50 sec. for
PAL).
When this option is selected, Slow shutter and
Backlight compensation become active.
Shutter priority: The camera performs the gain
adjustment and iris adjustment automatically and
you can select the shutter speed. When this option is
selected, Shutter speed becomes active.
Iris priority: The camera performs the gain adjustment
and shutter speed adjustment automatically, and you
can select the iris. When this option is selected, Iris
becomes active.
Manual: You can set the exposure manually. When this
option is selected, Shutter speed, Iris and Gain
become active.
Set the following items as required, according to the
selected exposure mode.
Backlight compensation
When you select On, the backlight compensation
function becomes effective.
DynaView (WDR) (SNC-RS46N/P, SNC-RS44N/P,
SNC-RS86N/P, SNC-RS84N/P only)
The DynaView function reduces white-out and blackout
in high-contrast shooting scenes such as under
backlighting. When you select On, the DynaView
function becomes effective.
Note
When DynaView or Backlight compensation is set to
On, oscillation may occur depending on the picture. In
this case, set it to Off.