Filter
Top Products
Administrating the Camera
Configuring the Viewer — Viewer Menu
89
• This camera does not correspond to the daisy chain
connection of a VISCA device. Use the camera and
the controller one-on-one.
Baud rate
Select a baud rate that corresponds to the peripheral
device of serial interface. Selectable baud rates are
shown below.
38400, 19200, 9600, 4800, 2400, 1200 (bps)
Parity bit
Select a parity that corresponds to the peripheral device
connected to the serial interface: none, odd or even.
Character length
Select the character length that corresponds to the
peripheral device connected to the serial interface: 7 or
8 (bits).
Stop bits
Select the stop bit that corresponds to the peripheral
device connected to the serial interface: 1 or 2 (bits).
OK/Cancel
See “Buttons common to every menu” on page 29.
Configuring the Viewer
— Viewer Menu
Click in the Administrator menu to display the
Viewer menu.
Using this menu, you can select the viewer to use and
configure advanced settings.
Layout tab
Homepage
Set the viewer or homepage to be displayed at the time
of access.
ActiveX Viewer
Plug-in free Viewer
Viewer