Filter
Top Products
Administrating the Camera
Setting the Camera Image and Audio — Camera Menu
37
Setting the Camera
Image and Audio
— Camera Menu
When you click in the Administrator menu, the
Camera menu appears.
Use this menu to set the functions of the camera.
The Camera menu consists of six tabs: Common,
Picture, Privacy masking, Day/Night, Video codec
and Streaming.
Common Tab
Color
Select Color or Monochrome for the image.
Zoom mode
Selects the zoom mode.
SNC-RH124, SNC-RH164
Full: An image can be zoomed up to 10× optical zoom
and 12× digital zoom, 120× zoom in total.
Optical: An image can be zoomed up to 10× optical
zoom.
SNC-RS46N/P, SNC-RS86N/P
Full: An image can be zoomed up to 36× optical zoom
and 12× digital zoom, 432× zoom in total.
Optical: An image can be zoomed up to 36× optical
zoom.
SNC-RS44N/P, SNC-RS84N/P
Full: An image can be zoomed up to 18× optical zoom
and 12× digital zoom, 216× zoom in total.
Optical: An image can be zoomed up to 18× optical
zoom.
Focus mode
Select the focus mode.
Auto: The focus is automatically adjusted.
Manual: The focus can be adjusted by using the ,
and buttons of the control panel
displayed in the main viewer.
Microphone
Select whether you are going to send audio from the m
microphone input connector. Select On to send the
audio from the network camera.
Note
When you change the Microphone setting, click
Refresh on the Web browser to reflect the change on the
opening main viewer page.
Mic volume
Set the volume level of the audio input from the m
microphone input connector. It is adjustable from –10 to
+10.
Audio
Select microphone input or line input.
Audio codec
Select the bit rate of audio from the m microphone input
connector. G.711 (64kbps), G.726 (40kbps), G.726
(32kbps), G.726 (24kbps) or G.726 (16kbps) can be
selected.
Note
If the bit rate is set to other than G.711(64kbps), no
audio is output when you use Plug-in free Viewer.
Echo suppressor
Select On to reduce echo from audio transmission.
Audio noise reduction
Select On to use Audio noise reduction.
Audio upload
Using SNC audio upload tool stored in the supplied
CD-ROM, you can output audio that is input to the
computer’s audio input terminal from a powered speaker
connected to the line output jack of the camera.
Select On to output audio from the speaker.
Volume
Set the speaker volume level from – 10 to + 10.
OK/Cancel
See “Buttons common to every menu” on page 29.
Camera