Filter
Top Products
122
You cannot shoot images. • No recording medium is inserted.
• The capacity of the recording medium is
insufficient.
• The /CF switch is not set to the proper
position.
• The write-protect switch on the “Memory Stick”
is set to the LOCK position.
• The CF card cover is open.
• You cannot shoot while the flash is charging.
• The mode dial is not set to , P, S, A, M or
SCN when you want to shoot a still image.
• The mode dial is not set to
when you want to
shoot a movie.
• The image size is set to [640 (Fine)] when you
shoot a movie.
p Insert a recording medium (pages 22, 23).
p Delete the images saved in the recording medium (page 43).
p Change the recording medium.
p Set the switch to the proper position (page 21).
p Set it to the recording position (page 144).
p Close the CF card cover (page 23).
—
p Set the mode dial to , P, S, A, M or SCN (page 27).
p Set the mode dial to (page 100).
p Use a “Memory Stick PRO” or Microdrive (pages 100, 144).
p Set the image size to any position other than [640 (Fine)].
Recording takes a long
time.
• NR slow shutter function is activated. pSet to a faster shutter speed than 1/25 second (page 55).
A sound is made when
changing between the
NightShot and
NightFraming modes, or
when the shutter button is
lightly pressed while
NightFraming is set.
• The sound is made by the lens in operation. p This is not a malfunction.
The image colors are not
correct.
• The NightShot or NightFraming function is set.
• Picture effect is activated.
p Cancel the Nightshot/NightFraming functions (pages 77 and
78).
p Cancel Picture Effect (page 79).
NightShot or
NightFraming does not
function.
• The mode dial is set to S, A, M or SCN.
• Manual focus mode is selected.
p Set it to , P or (only for NightShot) (pages 77 and 78).
p The NightFraming function cannot be used when manual focus
mode is selected. Set the FOCUS switch to AUTO (page 67).
Symptom Cause Solution