Filter
Top Products
89
Still image editing
Protecting images
– Protect
Mode dial:
To prevent accidental erasure of an
important image, you can protect it.
• Note that formatting the recording medium
erases all the data in the recording medium
even if images are protected, and these images
cannot be recovered.
• It may take some time to protect the images.
On the single screen
a Set the mode dial to .
b Display the image you want to
protect with b/B.
c Press MENU.
The menu appears.
d Select - (Protect) with b/B,
then press the center of the
multi-selector.
The image currently being displayed is
now protected, and the - (Protect)
mark is indicated on the screen.
e To protect other images,
display the image you want to
protect with b/B, then press
the center of the multi-
selector.
To cancel the protection
In Step 4 or 5, press the center of the
multi-selector again. The - mark
disappears.
On the Index screen
a Set the mode dial to , press
/ (index) to switch to the
Index screen.
b Press MENU.
The menu appears.
c Select - (Protect) with b/B,
then press the center of the
multi-selector.
d Select [Select] with b/B, then
press the center of the multi-
selector.
e Select the image you want to
protect with v/V/b/B, then
press the center of the multi-
selector.
The green - (Protect) mark is
indicated on the selected image.
f To protect other images,
repeat Step 5.
/
Mode dial
Multi-selector (v/V/b/B)
MENU
VGA
101
2/9
Protect
Exit
BACK/NEXT
80
min
TO NEXT
MENU
SELECT
Still
i
mage e
diti
ng