128
Others
You cannot print images. • The camera does not connect to the printer.
• The printer is not turned on.
• Movies and images recorded in RAW mode
cannot be printed.
• Images modified with a computer or images shot
using other than this camera may not be able to
be printed.
p Check that the camera and the printer are properly connected
using the USB cable.
p Turn on the printer. For further information, refer to the
operating instructions supplied with it.
—
—
Printing is canceled. • You disconnected the USB cable before the
(Not disconnect USB cable) mark
disappears.
• You switched the /CF switch while
printing.
—
—
You cannot insert the date
or print images in the
index mode.
• The printer does not provide these functions.
• The date may not be inserted in the index mode
depending on the printer.
p Consult with the printer manufacturer whether the printer
provides these function or not.
p Consult with the printer manufacturer.
“---- -- --”is printed on the
date-inserted part.
• The recording date data is not recorded on the
image.
p The images that do not have the recording date data cannot be
printed with the date inserted. Set [Date] to [Off] and print it.
Symptom Cause Solution
The camera does not
work, no operations can
be performed.
• You are not using an “InfoLITHIUM” battery
pack.
• The battery level is low or zero (The
indicator appears.).
• The AC Adaptor is not connected securely.
p Use an “InfoLITHIUM” battery pack (page 146).
p Charge the battery pack (page 14).
p Connect it securely to the DC IN jack of the camera and to a wall
outlet (wall socket) (page 17).
The power is on, but the
camera does not work.
• The internal system is not working properly. pRemove, and then, after one minute, reinstall the battery pack
and turn on the camera. If this does not work, press the RESET
button located inside the battery/“Memory Stick” cover with a
pointed object, then turn the power on again. (This will clear the
date and time settings, etc.)
Symptom Cause Solution