Filter
Top Products
123
Troubleshooting
Cannot shoot images with
the flash.
• The mode dial is set to .
• The flash is set to (No flash).
• (Twilight mode) is selected for the Scene
Selection function.
• (Landscape mode) is selected for the Scene
Selection function.
• The camera is in Multi Burst, Burst, or Exposure
Bracket mode.
• [Hot Shoe] in the SET UP settings is set to [On].
• When [Pop-up Flash] is set to [Manual] in the
SET UP settings, you did not pop the flash up
using the OPEN (FLASH) switch.
• NightShot is activated.
p Set the mode dial to , P, S, A, M or SCN (page 27).
p Set the flash to “Auto” (No indicator), (Forced flash), or
(Slow synchro) (page 68).
p Set it to other settings (page 37).
p Set the flash to (Forced flash) (page 37).
p Cancel the Multi Burst, Burst, or Exposure Bracket mode.
p Set it to [Off] (pages 48 and 140).
p Set [Pop-up Flash] to [Auto] in the SET UP settings (pages 48,
140) or pop the flash up using the OPEN (FLASH) switch
(page 69).
p Select the NightFraming function or cancel the NightShot
function (pages 77 and 78).
The macro mode does not
function.
• (Twilight mode) or (Landscape mode)
is selected for the Scene Selection function.
p Set it to other settings (page 37).
Cannot record in Multi
Burst, Burst, or Exposure
Bracket mode.
• [Mode] (REC Mode) is set to other than
[Normal].
p Set it to [Normal].
The eyes of the subject
come out red.
— p Set [Red Eye Reduction] to [On] (page 69).
The date and time are
recorded incorrectly.
• The date and time are not set correctly. p Set the correct date and time (page 19).
The aperture value and
shutter speed flash when
you press and hold the
shutter button halfway
down.
• The exposure is incorrect. p Adjust the exposure (page 59).
Symptom Cause Solution