Filter
Top Products
15
E:\SONY\2659813111\01US02GET.fm
DCR-HC36/HC46/HC96
2-659-813-11(1)
Getting Started
For DCR-HC46/HC96:
To remove your camcorder from the
Handycam Station
Turn off the power, then remove the
camcorder from the Handycam Station
holding both your camcorder and the
Handycam Station.
For DCR-HC36:
To use an outside power source
You can operate your camcorder using the
power from the wall outlet by making the
same connections as you do when charging
the battery pack. The battery pack will not
lose its charge in this case.
To remove the battery pack
1 Slide the POWER switch to OFF
(CHG). Hold down the V BATT
(battery) release lever with one hand.
2 Remove the battery in the direction of
the arrow with the other hand.
When storing the battery pack
Fully discharge the battery before storing it
for an extended period (p. 126).
Charging time
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
Recording time
Approximate time (min.) available when
you use a fully charged battery pack.
With the v mark
facing to the LCD
screen
DC IN jack
AC Adaptor
To the wall outlet
POWER switch
Power cord
DC plug
Battery pack Charging time
NP-FP30*
1
115
NP-FP50*
2
125
NP-FP70 155
NP-FP71 170
NP-FP90 220
*
1
supplied with DCR-HC36
*
2
supplied with DCR-HC46/HC96
2
1
POWER switch
V BATT (battery)
release lever
Continued ,