Filter
Top Products
35
E:\SONY\2659813111\01US03BAS.fm
DCR-HC36/HC46/HC96
2-659-813-11(1)
Recording/Playback
To cancel, touch [END].
• You cannot change the zoom speed with the
zoom buttons 5 on the LCD frame.
To check the remaining battery
(Battery Info)......................... qd
Set the POWER switch to OFF (CHG), then
press DISP/BATT INFO qd. The battery
information appears for about 7 seconds.
You can view the battery information for up
to 20 seconds by pressing DISP/BATT
INFO again while the battery information is
displayed.
To turn off the operation confirmation
beep (BEEP).......................... 4
See [BEEP] on page 68.
To use special effects .............. 4
See (PICT.APPLI.) menu on page 59.
To initialize the settings
(RESET) ............................... qf
Press RESET qf to initialize all the
settings, including the setting of the date
and time.
(Menu items customized on Personal Menu
are not initialized.)
Other part names and functions
I Remote sensor
Point the Remote Commander (p. 40)
towards the remote sensor to operate
your camcorder.
J Recording lamp (DCR-HC96)
The recording lamp lights up in red
during recording (p. 68).
• The recording lamp flashes if the remaining
tape or battery power is low.
K Internal stereo microphone
For DCR-HC96:
An Active Interface Shoe compatible
microphone will take precedence when
connected (p. 78).
O Speaker
Playback sound come out from the
speaker.
• For how to adjust the volume, see page 31.
Recording/playback
Remaining battery (approx.)
Recording capacity (approx.)