Filter
Top Products
67
DCR-HC36/HC46/HC96
2-659-813-11(1)
Using the Menu
E:\SONY\2659813111\01US04MEN.fm
When you set [A/V t DV OUT] ( )
to [ON], you can convert analog signals to
digital by connecting a digital device and an
analog device to your camcorder. See page
97 for details.
Selects the video plug to connect when you
input the picture from the other device via
A/V connecting cable.
BVIDEO
Connects via video plug of the A/V
connecting cable.
S VIDEO
Connects via S VIDEO plug of the A/V
connecting cable with S VIDEO cable.
See page 43.
When you set [ STREAM] and connect
your camcorder to your computer via the
USB cable, you can view the picture your
camcorder is currently seeing on your
computer like a live camera.
You can also import the picture to your
computer. Refer to the “First Step Guide”
on the supplied CD-ROM for details
(p. 93).
See page 21.
You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON]. The
frame is not recorded. Press DISP/BATT
INFO to make the frame disappear.
• Pointing the subject at the cross point of the
guide frame makes a balanced composition.
During playback, displays information
(data code) recorded automatically at the
time of recording.
BOFF
Data code is not displayed.
DATE/TIME
Displays the date and time.
CAMERA DATA (below)
Displays camera setting data.
ASteadyShot off
BExposure
CWhite balance
DGain
EShutter speed
FAperture value
• Camera setting data does not appear when
movies on a “Memory Stick Duo” are played
back.
• The exposure adjustment value (0EV), a shutter
speed, and the aperture value appear when still
images on a “Memory Stick Duo” are played
back.
• In the [DATE/TIME] data display, the date and
time are displayed in the same area. If you
record a picture without setting the clock, [--- --
----] and [--:--:--] will appear.
A/V t DV OUT (DCR-HC96)
VIDEO INPUT (DCR-HC96)
TV TYPE (DCR-HC46/HC96)
USB CAMERA
DISP GUIDE
GUIDEFRAME (DCR-HC96)
DATA CODE
0:00:00:0060min
AWB100
9dBF1. 8
AUTO
1
2
3
4
5
6
Continued ,