Filter
Top Products
17
E:\SONY\2659813111\01US02GET.fm
DCR-HC36/HC46/HC96
2-659-813-11(1)
Getting Started
DCR-HC46
* When the LCD backlight turns on.
DCR-HC96
* When the LCD backlight turns on.
On the battery pack
• Before changing the battery pack, slide the
POWER switch to OFF (CHG).
• The CHG (charge) lamp flashes during
charging, or the Battery Info (p. 35) will not be
correctly displayed under the following
conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is worn-out (For Battery
Info only).
• The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC IN jack of your camcorder or the Handycam
Station supplied with the DCR-HC46/HC96,
even when the power cord is disconnected from
the wall outlet.
On the charging/recording/playback time
• Times measured with the camcorder at 25°C
(77°F). (10 - 30 °C (50 - 86°F) is
recommended.)
• The recording and playback time will be shorter
when you use your camcorder in low
temperatures.
• The recording and playback time will be shorter
depending on the conditions under which you
use your camcorder.
On the AC Adaptor
• Use the nearby wall outlet when using the AC
Adaptor. Disconnect the AC Adaptor from the
wall outlet immediately if any malfunction
occurs while using your camcorder.
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
• Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
PRECAUTION
• Even if your camcorder is turned off, AC power
(house current) is still supplied to it while
connected to the wall outlet via the AC Adaptor.
Battery pack
LCD panel
opened*
LCD panel
closed
NP-FP50 (supplied) 120 150
NP-FP70 255 310
NP-FP71 300 370
NP-FP90 455 550
Battery pack
LCD panel
opened*
LCD panel
closed
NP-FP50 (supplied) 115 140
NP-FP70 240 295
NP-FP71 290 350
NP-FP90 435 525