Sony DCR-HC96 Camcorder User Manual


 
81
E:\SONY\2659813111\01US05BAS.fm
DCR-HC36/HC46/HC96
2-659-813-11(1)
Dubbing/Editing
Marking images on the “Memory Stick Duo”
with specific information
(Print mark/Image
protection)
When you are using a “Memory Stick Duo”
with the write-protect tab, make sure the
write-protect tab on the “Memory Stick
Duo” is not set to the write-protect position
(p. 124).
The DPOF (Digital Print Order Format)
standard is used to select images for
printing on your camcorder.
By marking images that you want to print
out, you do not need to reselect them when
you print them out. (You cannot specify the
number of printouts.)
1 Slide the POWER switch
repeatedly to turn on the PLAY/
EDIT lamp.
2 Touch t t t
[PRINT MARK].
3 Touch the image that you want to
print out later.
4 Touch t [END].
To cancel Print mark, touch the image again to
cancel Print mark in step 3.
Do not mark images on your camcorder if the
“Memory Stick Duo” already has some images
with the Print mark put on using other devices.
This may change the information of the images
with the Print mark put on using the other
device.
You can select and mark images to prevent
accidental erasure.
1 Slide the POWER switch
repeatedly to turn on the PLAY/
EDIT lamp.
2 Touch t t t
[PROTECT].
3 Touch the image that you want to
protect.
4 Touch t [END].
To cancel image protection, touch the image
again to cancel image protection in step 3.
Selecting still images for
printing (Print mark)
2/10
PRINT MARK
101–0002
101
OK
appears.
Preventing accidental erasure
(Image protection)
2/10
101–0002
PROTECT
101
OK
-
appears.