Filter
Top Products
98
E:\SONY\2659813111\01US06COM.fm
DCR-HC36/HC46/HC96
2-659-813-11(1)
2 Slide the POWER switch of your
camcorder repeatedly to turn on
the PLAY/EDIT lamp.
3 On the LCD screen, touch
t [MENU] t (STANDARD
SET) t [A/V t DV OUT] t [ON]
t t .
4 Start playback on the analog
video unit.
5 Start capturing procedures on
your computer.
Regarding operation, refer to the
operating instructions supplied with the
software or the on-line help.
After capturing images and sound, stop
capturing procedures on your computer,
and stop playback on the analog video
unit.
• The bundled software Picture Package or
ImageMixer VCD2 does not support the signal
convert function.
• You may not be able to output the pictures
correctly depending on the condition of the
analog video signal input to your camcorder.
• You cannot transfer pictures with copyright
protection signals to a computer.
• You can use a USB cable instead of an i.LINK
cable to transfer pictures to a computer. Note,
however, that the picture displayed may lack the
same smoothness.
• When you are using the USB cable or an i.LINK
cable to connect your camcorder to a computer,
make sure you insert the connectors in the
correct way. If you insert the connectors
forcibly, damage may occur and cause
camcorder malfunction.
Connecting an analog VCR to the computer via your camcorder (Signal
convert function) (Continued)