Filter
Top Products
________________________________________________________________________________________________________
44
Setting Up Motion Detection Recording
To record data only when motion is detected:
1. Press SETUP on the front of the DVR or remote control.
2. Select Record > Motion/Event Configuration and set MOTION to ON.
3. Set the motion SENSITIVITY level. [1~10].
4. Select AREA and press Enter to set a motion area (global setting; each channel can be configured individually).
5. Use the mouse to select or clear squares on the grid:
c) Click the squares to include in the motion grid.
d) Right-click and select SAVE AND EXIT to save the selected motion grid.
6. Repeat as necessary for each channel.
7. When motion area setup is complete select SAVE to save settings and exit setup.