Filter
Top Products
Embedded DVR User Guide
________________________________________________________________________________________________________
65
BACKUP (EXPORT)
Manual Export
Back up recorded data on a connected USB device.
Tip Refer to the USB Flash Drive Approved List in the Introduction chapter. If you are using a new USB device to
back up your data, you must format it first as FAT32.
To configure a data backup:
1. Press BACKUP on the front panel or remote control.
or
Click TOOL on the hover menu and select EXPORT.
2. Connect a USB device.
3. Select SCAN to locate the device.
4. Select the desired CAMERAs and the RECORDING START TIME and RECORDING END TIME for the backup.
5. Select ESTIMATE to display estimated data size and free space available.
Note ESTIMATE must be selected first, before EXPORT. If any backup parameters are changed (Date, Time,
Channels) you must select ESTIMATE again.
6. Select the EXPORT VIEWER check box to add the Export Viewer to the backup file.
Tip Video data is saved in a proprietary format and must be viewed using the Export Viewer software.
7. Select EXPORT.
Caution Do not shutdown the system during the backup process.