Filter
Top Products
22
1
Move the “
” to MANUAL by pushing the [MENU UP], [MENU DOWN] buttons.
2
Select the desired value of manual gain by pushing the [DATA UP], [DATA DOWN] buttons.
[DATA UP]
-15dB 20dB
[DATA DOWN]
( 3 ) WHT BAL (White balance)
The WHT BAL has two modes; AWB, MANUAL.
Move the “
” to MODE, push the [DATA UP], [DATA DOWN], and select one of the two modes: AWB, MANUAL.
(3. 1) Changing the setting in AWB (Automatic White Balance) mode
White balance mode setting AWB, MANUAL
Color temperature setting 3200K, 5600K
-- 3 WHT BAL -- (FILE A)
B PAINT adjustment -10 to 10
MODE AWB
C
TEMP 3200K
R PAINT adjustment -10 to 10
R PAINT 0
B PAINT 0
AWB area selection
AWB area display selection
AREA PRESET A
AREA DISPLAY OFF
PRESET A, PRESET B, PRESET C, PRESET D, PRESET E,
USER
Move up and down
by pushing
MENU UP, DOWN
Select the desired
value by pushing
DATA UP, DOWN
(a) Changing color temperature setting
1
Move the “
” to C.TEMP by pushing the [MENU UP], [MENU DOWN] buttons.
2
Select either 3200K or 5600K by pushing the [DATA UP], [DATA DOWN] buttons.
(b) Changing R PAINT
1
Move the “
” to R PAINT by pushing the [MENU UP], [MENU DOWN] buttons.
2
Select the desired value of red paint by pushing the [DATA UP], [DATA DOWN] buttons.
[DATA UP]
Red is increased.
-10
0 10
Red is decreased.
[DATA DOWN]
(c) Changing B PAINT
1
Move the “
” to B PAINT by pushing the [MENU UP], [MENU DOWN] buttons.
2
Select the desired value of blue paint by pushing the [DATA UP], [DATA DOWN] buttons.
[DATA UP]
Blue is increased.
-10
0 10
Blue is decreased.
[DATA DOWN]
(d) Changing the contents of the zone area selected by AWB
1
Move the “
” to AREA DISP by pushing the [MENU UP], [MENU DOWN] buttons.
2
Select the desired area by pushing the [DATA UP], [DATA DOWN] buttons.