Filter
Top Products
38
9. SPECIFICATIONS
* These conditions are only satisfi ed when the camera control unit is connected to camera head model # IK-HD5H.
Power supply DC 12 V ± 10 %
Power consumption Approx. 10.3W (including the camera head) (with the power supply voltage of 12V)
Pickup system RGB, 3CMOS, Micro prism system
Image sensor 1/2.9 inch CMOS
Effective pixels Horizontal: 1944 pixels, vertical: 1104 pixels
Output pixels Horizontal: 1920 pixels, vertical: 1080 pixels
Scanning system Progressive/Interlace
Scan frequency Horizontal: 67.433kHz, vertical: 59.94Hz (at setting of 1080p/59.94Hz)
Horizontal: 56.250kHz, vertical: 50Hz (at setting of 1080p/50Hz)
Horizontal: 33.716kHz, vertical: 59.94Hz (at setting of 1080i/59.94Hz)
Horizontal: 28.125kHz, vertical: 50Hz (at setting of 1080i/50Hz)
Sync system Internal/External (Automatic switching)
Horizontal resolution 1000TV lines standard
Vertical resolution 1000TV lines standard
Sensitivity F10 standard (2000 lx, 3000K at 59.94Hz setting), F11 standard (2000 lx, 3000K at
50Hz setting)
Minimum illumination 4.8 lx (at 59.94Hz setting, F2.2, sensitivity +20dB, BINNING: ON)
4.0 lx (at 50Hz setting, F2.2, sensitivity +20dB, BINNING: ON)
9.6 lx (at 59.94Hz setting, F2.2, sensitivity +20dB, BINNING: OFF)
8.0 lx (at 50Hz setting, F2.2, sensitivity +20dB, BINNING: OFF)
SN ratio 56 dB standard (GAIN 0dB, DNR OFF, DTL GAIN 0, GAMMA OFF, MATRIX OFF and
C.TEMP 5600K during light elimination)
Ambient temperature 0°C to 40°C (32°F to 104°F)
Ambient humidity Less than 90% (non condensing)
Weight Approx. 600 g (1.32 lbs)
External dimension
110(W) 40(H) 186(D) mm (4.33”(W) 1.57”(H) 7.32”(D)) (excluding protrusions)
Scene fi le (user memories) A, B, C, D, E
White balance AWB (Automatic white balance), MANUAL
Gain AUTO (Automatic gain control), MANUAL, OFF (0dB)
Output signal DVI (digital RGB) DVI-D terminal
1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i
3G-SDI (SMPTE 424 M compliant, SMPTE 425M Level A), 0.8 V (p-p) standard,
75 unbalanced, BNC connector
1080/59.94p, 1080/50p
HD-SDI (SMPTE 292 M compliant) 0.8 V (p-p) standard, 75 unbalanced, BNC connector
1080/59.94i, 1080/50i
External sync input SYNC 3 values ±0.3V ±6dB 75 unbalanced BNC connector
Horizontal: 67.433kHz ±35ppm, vertical 59.94Hz ±35ppm (at 1080p/59.94Hz setting)
Horizontal: 56.250kHz ±35ppm, vertical 50Hz ±35ppm (at 1080p/50Hz setting)
Horizontal: 33.716kHz ±35ppm, vertical 59.94Hz ±35ppm (at 1080i/59.94Hz setting)
Horizontal: 28.125kHz ±35ppm, vertical 50Hz ±35ppm (at 1080i/50Hz setting)
Sync signal output SYNC 3 values ±0.3V ±0.1V 75 unbalanced BNC connector
Horizontal:33.716kHz ±35ppm, vertical:59.94Hz ±35ppm (at 59.94Hz setting)
Horizontal:28.125kHz ±35ppm, vertical:50Hz ±35ppm (at 50Hz setting)
Interface Serial data interface (compliant with RS-232C)
Optional parts
IK-HD5H (1/2.9 inch 3CMOS camera head)
EXC-3HD03 (Approx. 3 m (118”) Camera cable)
EXC-3HD06 (Approx. 6 m (236”) Camera cable)
EXC-3HD10 (Approx. 10 m (394”) Camera cable)
EXC-3HD15 (Approx. 15 m (1181”) Camera cable)
Design and specifi cations are subject to change without notice.