Filter
Top Products
32
(8. 9) Change of DVI monitor receiver types
1
Move the “
” to DVI MONITOR by pushing the [MENU UP], [MENU DOWN] buttons.
2
Select PC or TV by pushing the [DATA UP]-[DATA DOWN] buttons
• PC: for use of PC monitor
• TV: for use of monitor TV
(8. 10) Change of I/P mode
Switching between Interlace and Progressive is performed.
1
Move the “
” to I/P MODE by pushing the [MENU UP], [MENU DOWN] buttons.
2
Select 1080p or 1080i by pushing the [DATA UP]-[DATA DOWN] buttons.
• 1080p:for use of 1080p (progressive)
• 1080i: for use of 1080i (interlace)
Note:
No image will be displayed on a monitor that is not in the correct setting mode. If this is the case, refer to the item
6.6 “Switching of I/P Modes” to return the mode to the appropriate one (interlaced or progressive).
(8. 11) Changing RS-232C baud rate
1
Move the “
” to BAUD RATE by pushing the [MENU UP], [MENU DOWN] buttons.
2
Select either 9600bps or 19200bps by pushing the [DATA UP], [DATA DOWN] buttons.