Filter
Top Products
6
2. COMPONENTS
(1) Camera Control Unit ......................................................................................................................1
(2) Accessories
(a) Instruction manual .................................................................................................................. 1
1. CAUTIONS ON USE AND INSTALLATION
• Handling the unit.
Do not drop, jolt, or vibrate, as this may result in
damage to the unit and may cause problems. Treat the
camera cables carefully to prevent cable problems,
such as breaks in the cable and loose connections.
• Install the camera in a location free from noise.
If the camera or the cables are located near power
utility lines or a TV, etc. undesirable noise may appear
on the screen. In such a case, try to change the
location of the camera or the cable wiring.
• Operating ambient temperature and humidity.
Do not use the camera in places where temperature
and humidity exceed the specifi cations. Picture quality
will deteriorate and internal parts may be damaged.
Be particularly careful when using in places exposed
to direct sunlight. When shooting in hot environments,
depending on the conditions of the object and the
camera (for example when the gain is increased),
noise in the form of vertical strips or white dots may
occur. This is not a malfunction.
• When not using the camera for extended periods
of time.
Switch the control unit off and disconnect the power
supply.
• Avoid using or storing the camera in the following
places:
Places fi lled with highly fl ammable and corrosive gas.
Places near gasoline, benzene, or paint thinner.
Places subject to strong vibration.
Places containing chemicals (such as pesticides),
rubber or vinyl products for extended periods of time.
• This product is for indoor use only.
The following descriptions are for a camera head
“IK-HD5H” connected to this camera control unit.
• Do not shoot intense light.
If strong light is entered, vertical stripes or traverse
bands may appear on the screen but this is not a
failure.
• Moire
A moire pattern is an interference pattern generated
when two repetitive line patterns overlap. This is not a
malfunction. Eliminating the repetitive line patterns, or
aligning the two patterns, will eliminate the moire.
• Handling of the camera head and protection cap.
Keep the camera head and protection cap away from
children as they may pose a choking hazard. Because
the protection cap protects the image sensing plane
when the lens is removed from the camera head, do
not discard the protection cap.
• When cleaning the camera.
Unplug the power source before cleaning. Clean
with a soft dry cloth only. Do not use chemicals or
chemically treated cloths. Chemicals may damage
coatings and printed letters. When cleaning the lens,
use lens cleaning paper.
• Installation without a tripod.
Before installing the camera head, make sure that the
location can withstand the total weight of the camera
head.
If this is not the case, reinforce the area to prevent the
unit from dropping, which may result in damage to the
unit or personal injury.