Filter
Top Products
7
3. ITEMS CONTROLLED BY THE SCREEN DISPLAY
Item Available selections
Preset value
(Factory setting)
Electronic shutter
MODE AUTO, MANUAL, SS MANUAL
AUTO level -100 – 0 – 100 0
AUTO exposure metering PEAK/AVE, MEDIAN
PEAK/AVE
AUTO peak/average 00 : 10 – 10 : 00 00 : 10
AUTO response speed 1 – 10 – 20 10
AUTO area
PRESET A, PRESET B, PRESET C, PRESET D, PRESET E,
USER (USER area is possible to set in 64 zones)
PRESET A
Maximum AUTO shutter
speed
1/200s, 1/250s, 1/300s, 1/350s, 1/400s, 1/450s, 1/500s,
1/550s, 1/600s, 1/700s, 1/800s, 1/900s, 1/1000s,
1/1200s, 1/1500s, 1/2000s, 1/4000s, OFF
OFF
MANUAL shutter speed
OFF, 1/100s, 1/125s, 1/250s, 1/500s, 1/1000s, 1/2000s,
1/3000s, 1/4000s, 1/5000s, 1/10000s
OFF
Syncro. scan 1/1125H – 1124/1125H, OFF OFF
Gain
MODE AUTO, MANUAL, OFF OFF
AUTO maximum gain 0dB to 20dB 20dB
AUTO minimum gain
-15dB to 0dB -15dB
MANUAL gain -15dB to 20dB 0dB
White balance
MODE AWB, MANUAL AWB
Color temperature 3200K, 5600K 3200K
AWB R PAINT -10 – 0 – 10 0
AWB B PAINT -10 – 0 – 10 0
AWB area
PRESET A, PRESET B, PRESET C, PRESET D, PRESET E,
USER (USER area is possible to set in 64 zones)
PRESET A
MANUAL R GAIN -100 – 0 – 100 0
MANUAL B GAIN -100 – 0 – 100 0
Gamma correction ON, OFF ON
Gamma correction level -10 – 0 – 10 0
Black gamma correction level LOW, NORMAL, HIGH NORMAL
Knee correction point 70%, 75%, 80%, 85%, 90%, 95%, 100% 85%
Knee correction slope
1 – 8 – 16 8
Master pedestal -200 – 0 – 200 0
Red pedestal -100 – 0 – 100 0
Blue pedestal -100 – 0 – 100 0
White clip 100% − 109% 109%
Detail gain 0 − 10 − 31 10
Detail boost frequency 1 − 10 − 16 10
HV balance 8/16 − 16/16 − 24/16 (ratio of V/H) 16/16
Digital noise reduction (DNR) ON, OFF OFF
Matrix
Correction ON/OFF ON, OFF ON
Selection of correction color R, R-Ye, Ye, Ye-G, G, G-Cy, Cy, Cy-B, B, B-Mg, Mg, Mg-R R
Phase -15 – 0 – 15 0
Gain -15 – 0 – 15 0
Chroma gain
-31 − 0 − 31 0
Ext. Sync
H phase adjustment
-650 – 0 – 650 0
Shading correction mode SET, MANUAL, OFF OFF
Manual shading correction -128 – 0 – 127 0
Detail signal output ON, OFF OFF
OSD output
ALL ON, DVI, SDI ALL ON
Vertical inversion ON, OFF OFF
Horizontal inversion ON, OFF OFF
Inversion mode display switch ON, OFF OFF