Filter
Top Products
35
( 10 ) Setting USER area
• When USER is selected for the AREA of the automatic shutter or for AWB, the light measurement zones can be
changed.
• The USER area is composed of 64 zones with 8 (vertical) x 8 (horizontal) areas, and each area can be set to ON/
OFF.
1
Set the output to area menu.
Set the output to the area menu by referring to the item “7.2 (1.1) (f) Confi rming the contents of the measurement
light area selected by automatic shutter” and “7.2 (3.1) (e) Confi rming the contents of the measurement light area
selected by AWB”.
Cursor
2
Move the cursor to the zone to be modifi ed.
The cursor moves up, down, right and left by pushing the [MENU UP], [MENU DOWN], [DATA UP], [DATA DOWN]
buttons.
[MENU UP]
Move to up
Move to down
[MENU DOWN]
Move to left [DATA DOWN] [DATA UP] Move to right
3
Select ON/OFF for the zone.
Select ON (effective) or OFF (ineffective) by pushing the [PAGE] button
When ON is selected, the selected area will be displayed brightly, and when OFF is selected, it will be dimmed.
4
Push [DISP] button to return to the menu.
Note:
OFF can not be selected for all 64 zones because the automatic shutter function and AWB function will not
perform correctly. (“AREA NG NOT AVAILABLE” displays.)