Filter
Top Products
TV-IP600/W Wireless Network Camera
47
TCP/IP
• IP Address Mode: Click a radio button to define the IP Address Mode:
Fixed IP You can select this option and enter the IP address directly. The default
settings are:
• IP Address – 192.168.10.30
• Subnet Mask – 255.255.255.0
• Default Gateway – 0.0.0.0
Dynamic
Address
(DHCP)
If your network uses a DHCP server, select this option. According to this
setting, the Camera will be assigned an IP address from the DHCP server
automatically. If choosing this option please ensure that your DHCP Server
is set to assign the Camera a Static IP address every time your Camera
starts up.
PPPoE If your application requires a direct connection from an ADSL modem
through the Camera’s RJ-45 LAN port, click this option and enter the User
ID and Password in the respective fields. (You should have an ISP PPPoE
account.) The Camera will then be issued an IP address from the ISP as it
starts up.
• DNS IP Address: A DNS (Domain Name System) Server is an Internet service that
translates domain names into IP addresses. Enter at least one DNS IP Address in this
section.
• Dynamic DNS: Choose whether to Enable or Disable Dynamic DNS by clicking the
respective radio button. The Dynamic DNS service allows you to alias a dynamic IP
address to a static hostname in any domain, allowing your Camera to be accessed more
easily from various locations on the Internet.
• Second HTTP Port: Some networks are configured to use a different port than the default
port number of 80 for HTTP traffic. If your network uses a different port than 80 for HTTP
communication, click the Enable radio button and type the port number used for HTTP
communication on your network in the Port Number field.
• UPnP: UPnP is a pervasive peer-to-peer architecture type used for the network
connectivity of intelligent appliances and PCs of all form factors. Click the Enable radio
button to enable this function on your Camera.