62
Functions of the Interrupt Playback Window Set
Chapter 8 Other Operations
scheduled to be played will be replaced with the one
selected for interrupt playback.
When a control command is selected, the selected
command will be carried out on the players. (In this case,
there is only one button [Execute] displayed, instead of
[Play] and [Stop].)
When other content is selected, playout performed on the
players at that time will stop, and the selected content will
be played, instead.
Toolbar
The following buttons are provided on the toolbar in the
“Content Management” window.
See “Content Management window” on page 34 and
“Content Management window” on page 40 for details on
the other buttons on the toolbar, and each tab of the
“Content Management” window.
VSP-NS7 Communication Status window
The “VSP-NS7 Communication Status” window lists the
players in the group selected with the “Group” drop-down
list box of the “Content Management” window. It enables
you to check the status and distribution progress of each
player.
The “VSP-NS7 Communication Status” window in the
“Interrupt Playback” window set is the same as the “VSP-
NS7 Status” window in the “Send Content” window set.
See “VSP-NS7 Status window” on page 56 for details on
the window.
Functions of the Interrupt
Playback Window Set
Menus in the Content Management
Window
Right-clicking on a tab of the “Content Management”
window displays a context-menu to provide functions you
can use for an item on the tab.
Some of the commands also appear as buttons on the
“Content Management” window toolbar.
Play command
Opens the “Interrupt Playback” window to distribute the
selected piece of material or playlist to the players in the
group selected by the “Group” drop-down list box, and
start interrupt playback with it.
Execute command
Distributes the selected control command to the players in
the group selected by the “Group” drop-down list box, and
carries it out.
Stop command
Stops interrupt playback performed on the players in the
group selected by the “Group” drop-down list box.
See “Interrupting Playout” on page 28 for details on
interrupt playback.
For the other commands, see “Menus in the Content
Management Window” on page 36 for material tabs, and
“Menus in the Content Management Window” on page 42
for the “Playlist” tab.
Menus in the VSP-NS7
Communication Status Window
The “VSP-NS7 Communication Status” window provides
no menus.
Button Description
Opens the “Interrupt Playback” window to
distribute the selected piece of material or playlist
to the players in the group selected by the
“Group” drop-down list box, and start interrupt
playback with it.
This button appears when a tab other than the
“Control” tab is selected.
Distributes the selected control command to the
players in the group selected by the “Group” drop-
down list box, and carries it out.
This button appears when the “Control” tab is
selected.
Stops interrupt playback performed on the players
in the group selected by the “Group” drop-down
list box.
This button appears when a tab other than the
“Control” tab is selected.
