American Dynamics RAS916LS Security Camera User Manual


 
CHAPTER 5
Configuring Text Displayed On-Screen
This chapter describes how to modify settings related to text displayed by the dome. It includes
settings for displaying dome status information, names, diagnostics, and pointing direction. It also
provides instructions for programming names and configuring text display options.
In This Chapter
Overview of On-Screen Text Display Settings............................................................5–1
Displaying or Hiding Status Information.....................................................................5–2
Displaying or Hiding All Name Information...............................................................5–3
Displaying Diagnostic Tests During Reset..................................................................5–4
Displaying Direction Indicators...................................................................................5–5
Configuring the Display of Name Information............................................................5–6
Assigning or Changing Name Information..................................................................5–7
Changing the Settings for Text Displayed On-Screen.................................................5–9
What To Do Next.......................................................................................................5–11
Overview of On-Screen Text Display Settings
When On-Screen Text Display is selected from the Dome Configuration Menu, the following
screen appears:
ON-SCREEN TEXT DISPLAY
STATUS DISPLAY ON/OFF
DISABLE ALL NAMES? YES/NO
DIAGNOSTIC DISPLAY ON/OFF
DIRECTION INDICATOR ON/OFF
NAME CONFIGURATION MENU
TEXT ATTRIBUTE OPTIONS
EXIT
Use this screen to display dome status information, enable or disable the display of all name
information, display diagnostic information after a dome reset, and display direction information
about where the dome is pointing. You may also start the Name Configuration Menu and the
Text Attribute Options screens.
To change the settings, move the highlight bar to appropriate field and make the changes.
To return to the Dome Configuration Menu, select Exit.