American Dynamics RAS916LS Security Camera User Manual


 
Pelco Command Summary
The following table lists the commands to operate the configuration utility when the dome is installed
in a Pelco environment.
If you want to … Use …
Start the configuration utility.
Set Preset 95
Move the highlight bar on the active menu.
Tilt Up/Down
Select the highlighted item on the active menu.
Iris Open (or Focus)
Increase the value of the selected setting. For example, Red or Blue
white balance values.
Pan Right (or Zoom In)
Decrease the value of the selected field. For example, Red or Blue
white balance values.
Pan Left (or Zoom Out)
Display the next choice for the setting. For example, Maximum
Zoom setting.
Pan Right (or Zoom In)
Display the previous choice for the setting. For example, Maximum
Zoom setting.
Pan Left (or Zoom Out)
Setting Names / Working with Passwords
When setting names or entering password information, the screen displays the available characters in
the selected languages. In these situations, the following commands are used:
If you want to … Use …
Move the highlight left or right in the character field.
Pan
Move the highlight up or down in the character field.
Tilt
Select the highlighted character in the character field.
Iris Open (or Focus)
Move the cursor to the right of the current character in the name or
password.
Pan Right (or Zoom In)
Move the cursor to the left of the current character in the name.
Pan Left (or Zoom Out)
Additional Controller Commands
Use the following controller commands to perform these SpeedDome Ultra functions:
If you want to... Use...
Flip the dome 180°
Call Preset 33
Return to 0° pan
Call Preset 34
Turn IR Mode On
Set Preset 88
Turn IR Mode Off
Set Preset 89
Reset Dome
Set Preset 94
Pelco Coaxitron and “P” Protocols Command Summary C–3